Home > NEWS & BLOG >

Different Power UV Laser Marking Machine

  Nowadays, there are more and more laser marking machines on the market,such as: CO2 laser marking machine, semiconductor, fiber laser marking, ultraviolet laser marking machine etc., Today,we will explain different power UV laser marking machine:

  The UV laser marking machine is a quite intelligent machine on the market,which is more expensive than others. The UV laser marking machine can be used ultra-fine marking because the focusing spot and the processing heat affected zone is small,the fast marking speed ,the high efficiency; the stable performance of the whole machine and the low power consumption,which is mainly used for flexible PCB board marking, FPC board cutting,gifts, Apple data line head,silicon wafer, plastic buttons,LCD liquid crystal glass, electronic components,metal surface plating marking, communication equipment, building materials,  high requirements Light button, plastic parts such as UV oil etc.

  What are the powers of UV laser marking machines?

  1.5W, 3W, 5W, 10W and 15W. The higher the power, the higher the price.

  Most of the 1.5 to 5W UV laser equipment is used in precision marking. The larger the power, the wider the application range, the price is higher. it is recommended to use 5W UV laser equipment if you need engouh budget, which is more extensive than 1.5W equipment, The 10-15W  UV laser equipment is quite expensive, mainly used in precision cutting,  such as FPC, ceramic sheets, glass sheets and other processes;

UV laser marking sample

  How to choose ultraviolet marking machine

  1, The laser outputs good beam quality, including mode and mode stability;

  2, you better to strict test before you decide to purchase.

  3, The operation is simple and convenient, the control key function is clear, the illegal operation can be rejected, and the laser is protected from damage.

  4, Whether the laser output power is large enough (this is the key to speed and effect), whether the energy is stable (usually requires 2% stability, in some cases 1%, in order to produce the desired effect);

  5,The laser should have high reliability and should be able to work continuously in harsh industrial processing environments;

  6,The laser itself should have good maintenance, fault diagnosis and chain function, and the downtime should be short;
Contact Us

Copyright © Shenzhen Otlaser Co.,Ltd.

All Rights Reserved