Home > Laser Marking >
30W CO2 Laser Marking Machine


30W CO2 Laser Marking Machine



Product Description

30W CO2 laser marking machine adopts the imported CO2 RF laser tube, which has a long life of 20,000-50,000 hours,including 10W, 30W, 50W, 100W CO2 lasers. 30W CO2 laser marking machine has a large power and high electro-optical conversion efficiency,the CO2 gas and other auxiliary gas are charged into the discharge tube then converted into a laser beam. The laser beam path is changed by a computer controlled galvanometer to achieve automatic marking. The core components of  CO2 laser marking machine are all imported, such as CO2 RF tube and high-speed scanning galvanometer. It guarantees high engraving precision and speed, performance and stability and work continuously for a long time.

30W CO2 laser marking machine features:

1, 30W co2 laser marking machine has fast precision high marking speed of up to 7000mm / s to improve processing efficiency.

2, According to the characteristics of the workpiece, different platforms and fixtures are selected.

3, Graphic text, smart and convenient, no printing consumables, low processing costs.

4, The laser marking machine operating system adopts the Windows interface, which is easy to operate,supporting various software outputs such as AutoCAD, CorelDRAW, Photoshop, etc. It can realize automatic arrangement of text symbols, graphic images, barcodes, QR codes, serial numbers and other automatic increments, PLT, PCX, DXF, BMP, JPG and other file formats, you can directly use the TTF font device.

5,Non-toxic, no deformation, no pollution, wear resistance. The depth of engraving can be controlled at will,working 24 hours

30W CO2 laser marking machine application industry:

Non-metallic and part of metal materials,widely used in food packaging,rubber products,clothing accessories, pharmaceutical packaging,beverage packaging, architectural ceramics,leather,fabric cutting, craft gifts,electronic components, shell nameplate.

Glass tube 30W CO2 laser marking machine precautions

1, Turn on the cooling water.

2, Cooling water requires low inlet and high outlet. Adjust the outlet position to ensure that the cooling water is filled with water,no air bubbles in the tube. It is recommended to use clean soft water,so that not to cause blockage of cooling water.

3, The cooling water temperature should be 18~25°C, and the height should not exceed 30°C. Cooling water flow rate 2L-4L/min;

4, If the temperature of cooling water is too high, it will worsen laser mode and engraving ability. If poor cooling for a long time, it will damage the lens in the laser cavity or cause gelatinization between the water jacket and the lens, which will eventually cause damage to the laser.

5, If the temperature of cooling water is too low, in the humid weather, small water droplets will condense on the surface of the laser, which may cause high-voltage ignition, interfere with the normal operation of the equipment or even damage the electronic control components. In humid weather, it is recommended that the cooling water temperature be 5 °C lower than the room temperature.

6, In cold areas, it must make sure the cooling water not freeze. Especially after stopping laser, the cooling water should not be stored in the laser tube to prevent the cooling water from freezing and causing the crack.

7, For users who use AC power, the cooling water tank must be grounded;

Hot Products

Product List

Contact Us


All Rights Reserved